Description
Where to install it
The rooms this model was made for
- NurserySoft, glare-free light for the bedtime routine.
- BedroomAccent lighting for reading without switching on the ceiling light.
- Living roomAdds a second light source and breaks up flat ceiling lighting.
- Dining roomFrames the table and warms up evening meals.
- Home officeLights the desk without reflecting on the screen.
- KitchenPuts light right where you work, over counter or island.
- IP20 rated: for dry rooms only, away from water outlets.
Installation
Installation, step by step
- 01Cut the powerSwitch off the breaker for the room and check that the ceiling box is dead.
- 02Set the dropAbove a table, aim for 75 to 90 cm between the tabletop and the bottom of the shade. In a walkway, leave at least 2.10 m of clearance.
- 03Secure the fixingUse the existing hook or a fixing rated for the weight. In a hollow ceiling, use a toggle anchor.
- 04Wire it up and closePlug in or wire into the terminal block, then push the ceiling cup back up flush.
- Bulb not included, to be bought separately.
- E27 cap.
- Power supply 110-240V.
- Hard-wired installation: call in a professional if in any doubt.
Frequently asked
What people ask us about this model
Is the bulb included?
No, the bulb is not included. Plan for a E27 cap bulb.
Which bulb should I use?
This model takes a E27 cap.
Can it go in a bathroom or outdoors?
No. An IP20 rating means dry rooms only. Avoid the bathroom, the utility room and outdoors.
What are its exact dimensions?
Dimensions as stated by the maker: (Largeur) : 50cm x (Hauteur) : 31cm. Measure the intended spot before ordering, allowing for clearance around the fitting.
How do I look after it?
This light is made of tissu, rotin. To keep it looking its best: dust the shade dry, with a soft brush or a microfibre cloth, without water or detergent; keep the wooden parts away from damp and wipe them dry.
Architects, hospitality, fit-out
This model on a project
Built for the site
- IP20 rated: dry indoor use.
- Standard E27 cap: sources can be replaced in service, with no proprietary part.
- Power supply 110-240V.
Volume discounts
Your order
- A named quote within 48 working hours.
- Payment by bank transfer, on receipt of invoice.
- One contact from quote to delivery.
- Large volumes and firm lead times: to be confirmed before ordering.
Request a quote
Your request goes straight to our trade desk. Reply within 48 working hours, to the address you provide.









Reviews
There are no reviews yet.