Description
Installation
Installation, step by step
- 01Cut the powerBreaker off, then confirm the circuit is dead.
- 02Remove the old fittingDisconnect and take down the old fixing, keeping the hook if it is still sound.
- 03Fix the bracketScrew the bracket to the ceiling, directly over the junction box, keeping it level.
- 04Wire it up and clip onConnect the wires, push the body flush to the ceiling, then lock the screws or bayonet fitting.
- Bulb included — nothing else to buy.
- E27 cap.
- Power supply 90-260V.
- Hard-wired installation: call in a professional if in any doubt.
Frequently asked
What people ask us about this model
Is the bulb included?
Yes, the bulb comes with the light. You can install it and switch it on straight away, with nothing else to buy.
Which bulb should I use?
This model takes a E27 cap. The intended bulb type is led. The stated colour temperature is Chaude, Froide: pick an equivalent replacement bulb to keep the same feel.
Can it go in a bathroom or outdoors?
No. An IP20 rating means dry rooms only. Avoid the bathroom, the utility room and outdoors.
What are its exact dimensions?
Dimensions as stated by the maker: S (Largeur) 40 cm × (Hauteur) 18 cm M (Largeur) 50 cm × (Hauteur) 21 cm L (Largeur) 60 cm × (Hauteur) 21 cm. Measure the intended spot before ordering, allowing for clearance around the fitting.
How much area does it light?
The stated light throw is 3 à 5 mètres. Beyond that, add a second light source rather than one brighter fitting: the light spreads better and glares less.
How do I look after it?
This light is made of tissu, bois. To keep it looking its best: dust the shade dry, with a soft brush or a microfibre cloth, without water or detergent; keep the wooden parts away from damp and wipe them dry.
Architects, hospitality, fit-out
This model on a project
Built for the site
- IP20 rated: dry indoor use.
- Standard E27 cap: sources can be replaced in service, with no proprietary part.
- Bulb supplied with the fitting: ready to commission on arrival.
- A consistent Chaude, Froide across the whole batch: the same tone from one fitting to the next.
Volume discounts
Your order
- A named quote within 48 working hours.
- Payment by bank transfer, on receipt of invoice.
- One contact from quote to delivery.
- Large volumes and firm lead times: to be confirmed before ordering.
Request a quote
Your request goes straight to our trade desk. Reply within 48 working hours, to the address you provide.









Reviews
There are no reviews yet.