Description
Installation
Installation, step by step
- 01Cut the powerSwitch off the breaker for the room and check that the ceiling box is dead.
- 02Set the dropAbove a table, aim for 75 to 90 cm between the tabletop and the bottom of the shade. In a walkway, leave at least 2.10 m of clearance.
- 03Secure the fixingUse the existing hook or a fixing rated for the weight. In a hollow ceiling, use a toggle anchor.
- 04Wire it up and closePlug in or wire into the terminal block, then push the ceiling cup back up flush.
- Bulb included — nothing else to buy.
- GU10 cap.
- Power supply 90-260V.
- Hard-wired installation: call in a professional if in any doubt.
Frequently asked
What people ask us about this model
Is the bulb included?
Yes, the bulb comes with the light. You can install it and switch it on straight away, with nothing else to buy.
Which bulb should I use?
This model takes a GU10 cap. The intended bulb type is led. The stated colour temperature is Chaude, Froide, Intensité variable: pick an equivalent replacement bulb to keep the same feel.
Can it go in a bathroom or outdoors?
No. An IP20 rating means dry rooms only. Avoid the bathroom, the utility room and outdoors.
What are its exact dimensions?
Dimensions as stated by the maker: (Diamètre) 28 cm x (Hauteur) 4 cm (Câble réglable jusqu'à 180 cm) (Diamètre) 28 cm x (Hauteur) 4 cm (Câble réglable jusqu'à 150 cm). Measure the intended spot before ordering, allowing for clearance around the fitting.
How much area does it light?
The stated light throw is 3 à 10 mètres. Beyond that, add a second light source rather than one brighter fitting: the light spreads better and glares less.
Is it dimmer compatible?
Yes, this model is dimmable. Check that your dimmer is LED-rated: an older dimmer built for halogen will cause flicker and buzzing.
Architects, hospitality, fit-out
This model on a project
Built for the site
- IP20 rated: dry indoor use.
- Standard GU10 cap: sources can be replaced in service, with no proprietary part.
- Bulb supplied with the fitting: ready to commission on arrival.
- A consistent Chaude, Froide, Intensité variable across the whole batch: the same tone from one fitting to the next.
Volume discounts
Your order
- A named quote within 48 working hours.
- Payment by bank transfer, on receipt of invoice.
- One contact from quote to delivery.
- Large volumes and firm lead times: to be confirmed before ordering.
Request a quote
Your request goes straight to our trade desk. Reply within 48 working hours, to the address you provide.









Reviews
There are no reviews yet.